Category Archives: PPE

BMW M140i Xdrive 340 Hp

Equipped with Akrapovič exhaust system and BMC air filter

Measured stock at 371 Hp & 514 Nm, equipped with Digital Module with specific PPE mapping to 436 Hp & 597 Nm.

Do not hesitate to contact us for all information and price.

 

BMW M140i Xdrive 340 Hp

Equipped with Akrapovic Exhaust System​ and BMC AIR FILTERS​

Measured stock at 371 Hp & 514 Nm, equipped with Digital Module with specific PPE mapping to 436 Hp & 597 Nm.

Do not hesitate to contact us for all information and price.

 

KW Variant 1 inox-line for VW Golf II G60

🚨🚨🚨 Available at Power Plus Engineering. 🚨🚨🚨

Version:

Variant 1

Damping adjustment:

None

Lowering FA/RA:

45-85mm/45-85mm

Adjustment FA/RA:

Thread/Thread

Material:

Stainless steel

Product Category:

Coilover kits

Axle Load FA/RA:

-840kg/-740kg

Year of Prod.:

08/1983-12/1992

Vehicle type:

VW Golf II 19.. 1.8 GTI G60 Benzin 118KW 1781ccm

Sporty handling combined with outstanding looks. With factory pre-configured damping.
The KW coilover kit Variant 1 “inox-line” is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure – not just the car’s life.

Continuous lowering
With the KW coilover Variant 1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans
KW coilover Variant 1 “inox-line” satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don’t buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 “inox-line”, rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

Trust In Our Experience
We are the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers “Made in Germany”. Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Of course, we give as a German manufacturer a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty will increase up to 5 years when the kit has been installed at one of our KW specialist dealers.

– Optimally pre-adjusted
– Sporty and comfortable dampening technology
– Stainless steel technology “inox-line”
– Individually height adjustable
– tested adjustment range
– Ready to install complete solution
– High quality components for a long durability
– Complete documentation for easy handling

Do not hesitate to contact us for all information and price

 

🚨🚨🚨 Available at Power Plus Engineering. 🚨🚨🚨

KW coilovers in a Honda Civic Type R

VTEC just kicked in, yo! KW Variant 3 and Clubsport out now

With the Honda Civic Type R, the Japanese car manufacturer, returns to the segment of compact sports cars.

 

The KW Variant 3 and KW Clubsport give you the possibility of a continuous lowering of 15 to 35 mm at the drive axle is adjusted directly on the stainless steel strut. At the rear axle, a lowering in the range of 5 to 25 mm can be carried out.

 

 

 

In addition to an approved lowering, the suspension kit made of stainless steel allows you to adjust the damping forces independently in rebound (16 clicks) and compression damping (12 clicks).

 

KW coilovers in a Honda Civic Type R tested on the KW 7-post rig

 

The damping characteristics that was determined after numerous driving tests on the motorway, country roads and on the KW 7-post rig, significantly improve the performance of the Type R.

 

KW coilovers in a Honda Civic Type R
KW coilovers in a Honda Civic Type R

 

Drivers with a KW coilover suspension kit installed benefit from our sustainable technology transfer from motorsport to the road. Compared to the other Civic models, the differences to the new top model are enormous. For example, the Honda features, a stiffer body and also a double-axle front wheel suspension with two axle journals, which are also used in the Astra OPC, Focus R.S. or Mégane R.S.. This minimizes the drive influences on the steering. Axle stubs and strut are separated at this axle construction in order to keep the ‘torque steer’ low at high-torque front wheel drive vehicles. With our Variant 3 coilover suspension, the Type R becomes an even more agile sports car.

 

 

For example, take into account the handling with changed wheel / tire dimensions, the rebound can be changed with 16 clicks. “If the rebound valves are further opened, the ride comfort when driving slowly is increased – in case you want it.

 

 

The twelve clicks of the compression damping also affects the tire grip, directional stability and handling characteristics.

 

KW Clubsport and Variant 3 coilovers in a Honda Civic Type R

 

The Variant 3 and Clubsport 2-way kit harmonizes well with the driver assistance systems such as the Honda Agile Handling Assist (AHA) and the Electronic Stability Program (VSA).

 

KW coilovers in a Honda Civic Type R with a lowering of 15 to 35 mm

 

A continuous lowering of 15 to 35 mm at the drive axle is adjusted directly on the stainless steel strut. At the rear axle, a lowering in the range of 5 to 25 mm can be carried out.

Mercedes Benz C200 Cdi 136 HP

Measured stock at 161 Hp & 377 Nm

remapped to 191 Hp &  448 Nm.

Removal speed limit

Do not hesitate to contact us for all information and price.

🚨🚨🚨 Available at Power Plus Engineering. 🚨🚨🚨

KW coilovers in a Porsche 911 G Body

Out now: full in compression and rebound adjustable KW V3 shock absorbers for the legendary Porsche 911 (G-model series) available

 

The classic Porsche 911 models have been characterized for decades by a timeless styling coupled with unadulterated sportiness. Everywhere in the world, the “911” is known as a sports car icon and the “G-Series model” enjoys an unimagined popularity.

 

 

And the demand for an individual suspension kit is accordingly high. From now on, in compression and rebound damping independently adjustable KW Variant 3 shock absorbers are available as a suspension complete set in galvanized steel housings for all Porsche 911 G-series model (from model year 1974) built from 1973 – 1989 also known as “G-body”.

 

 

Our full in the damping forces adjustable V3 shockabsorbers give you the possibility to adjust your own personal setting.The great advantage besides a quantum leap in terms of driving dynamics is that the “KW suspension kit” features spindle housings and dampers, so time-consuming strut conversions with replacement cartridges is not necessary. Also, the standard torsion bar springs on the front and rear axle can still be used.

 

Lesser body roll on bad roads and a more neutral driving behaviour – approved by the official German Porsche owners club*

 

 

With the integrated compression and rebound adjustment click adjusters, it is easy to individually adjust our recommended damper basic setup.

 

 

For example, with its 16 click setting, the rebound allows to directly take influence on the handling characteristics as well as the driving comfort. With the low speed compression valve, which can be adjusted in twelve clicks, the driving behavior of the Porsche classic can be further increased if desired.

 

 

A higher compression level on the front axle allows an even more direct steering, and on the rear axle, higher compression damping forces counteract the oversteering. Due to the degressive valve assembly of the preconfigured high speed compression valve, the damping is positively influenced in the case of a sudden driving over street bumps. The wheels can immerse suddenly and this for example prevents the jumping over road irregularities. A classic Porsche 911 equipped with the adjustable KW shock absorbers receives a much more direct handling.

 

 

The G-Body also gets significiantly more grip on the rear axle without an increased oversteer. Even the remaining comfort is increased. “I drove a lot of classic Porsche”, says Carsten Prochaska, President of Porsche Club für den klassischen 911 Südwest e.V. “But the new V3 dampers in a G-Body is the perfect kit even on bumpy roads I got a relaxed ride. All four tyres are always connected with the road and the steering is always direct without the typical oversteer. It is perfect and I will upgrade my Porsche SC with the new shock absorbers.”

 

 

The recommended retail price for the German market incl. 19% VAT without shipping cost for the independently in rebound and compression forces adjustable KW V3 shock absorber kit is 2.699,00 Euro.

* = Porsche Club für den klassischen 911 Südwest e.V.

Bmw 325i E30 171 Hp PPE DYNO RUN

Equipped with exhaust header, TA silencer, modified ECU

180 Hp & 230 Nm

Do not hesitate to contact us for all information and price.

Bmw 325i E30 171 Hp PPE DYNO RUN

Equipped with exhaust header, TA silencer, modified ECU

180 Hp & 230 Nm

Do not hesitate to contact us for all information and price.

🚨🚨🚨 Available at Power Plus Engineering. 🚨🚨🚨

KW coilovers in a VW Golf Mk7

For every demand the perfect suspension for the VW Golf Mk7!

Already in its seventh generation, the VW Golf sets the standard in the compact class. The stainless steel KW coilovers give the latest Golf a significant increase in driving dynamics and safety combined with a descent lowering.

 

 

KW Clubsport – the maximum driving dynamics for the road and racetrack!

The KW Clubsport coilovers are characterized by an uncompromising transfer of technology from motorsports to the road.

 

KW clubsport coilovers for a VW Golf Mk7

 

The KW Clubsport coilovers, available in KW Clubsport 2-way (independent rebound and compression adjustment with 16 clicks in rebound and 12 clicks in compression damping) and KW Clubsport 3-way (adjustable in 6 clicks in low-speed and 14 clicks in high-speed compression damping as well as 16 clicks in rebound), differentiate from conventional sport suspensions and coilovers by their high performance dampers. Of course, the KW Clubsport coilovers with their aluminum Unibal top mounts are street legal are the ideal performance suspension for all VW Golf drivers who regularly take part at track days and want to be competitive.

 

KW DDC – the (suspension)future is now!

For the VW Golf 7 with ACC (adaptive chassis control; also known as DCC – dynamic chassis control) the adaptive KW DDC Plug & Play coilovers are available.

 

KW DDC coilovers for a VW Golf Mk7

 

During installation, the adaptive series suspension is replaced with KW technology and the VW computer electronics immediately recognize the KW DDC Plug & Play coilover kit. All vehicle-specific suspension functions remain and the original control button will also be used. If the Golf doesn´t feature an adaptive series suspension, the KW DDC ECU coilover kit is the ideal retrofit solution including suspension control unit, cable connections and optional wireless module to adjust the suspension via smartphone.

 

KW coilovers Variant 1, Variant 2, Variant 3 and KW Street Comfort

KW Variant 1: With its preconfigured KW damper setup the “Variant 1” offers the optimum balance of sportiness and everyday practicality.

 

 

KW Variante 2: In addition to a continuous lowering, with the “Variant 2” the damper setup can also be made more comfortable or more sporty with 16 clicks of adjustable rebound damping.

 

 

KW Variant 3: The perfect symbioses of driving dynamics, every day practicality and setting options is offered by the KW Variant 3 coilover. In addition to a continuous lowering, a separate rebound and compression damping adjustment is possible. 16 exact clicks in rebound and 12 exact clicks in compression damping.

 

 

KW Street Comfort: If the standard sport suspension should be too rough in everyday life or if your lowering springs with the stock dampers doesn’t work so well after a while, the KW Street Comfort coilover kit is the ideal solution to get more driving comfort. The shorter KW damper housings allow a comfortable residual spring travel. In addition, the rebound damping can be adjusted more comfortable or sporty with 16 clicks.

 

 

The continuous lowering of the KW coilover suspension on the Golf 7 is achieved via the composite spring perch directly on the stainless steel strut housings dirt-resistant trapezoidal threads and at the rear axle height adjustment. So on both axles the Golf 7 can be lowered within the tested adjustment range of 35 – 65 mm (Street Comfort 30 – 55 mm).

🚨🚨🚨 Back on stock !! 🚨🚨🚨

Ask for your free plateholder.

At least 5 Hp extra 😜